Concrete hydration heat inhibitor

Concrete hydration heat inhibitor

Concrete impact and abrasion-resistant additive

Concrete impact and abrasion-resistant agent

LZ-GT Non-Shrink Self-Leveling Grouting Material

LZ-GT Non-Shrink Self-Leveling Grouting Material is an economical, non-shrink, self-leveling chemical grout that delivers excellent performance and is suitable for a wide range of structural and foundation applications, including equipment installation grouting, grouting for equipment, column bases, and base frame foundations, as well as filling cavities, cracks, and recesses, and for grouting repairs.

LZ-EG Epoxy Bearing Grout

LZ-EG epoxy bearing grout is a three-component, high-performance, high-precision, solvent-free epoxy resin grout that is resistant to moisture. It can be applied at temperatures ranging from +5°C to +30°C. Primarily used for bridge bearing grouting, mechanical joint grouting, precise installation and positioning of equipment bases, as well as grouting and installing machine bases and foundation baseplates for both light and heavy-duty machinery.

LZ-R1 Polyhydroxy Acid High-Performance Water Reducer

LZ-RA1 Rut-Resistant Agent is a modified material developed based on the "rock asphalt combined with polymer modification" technology, designed to enhance the load-bearing capacity of asphalt pavements. It enables ordinary asphalt concrete to achieve a dynamic stability level of 10,000 cycles/mm or higher, meeting both domestic and international high-modulus asphalt concrete technical standards as well as all technical specifications outlined in the industry standard for "Rut-Resistant Agents."

LZ-HVA High-Viscosity Modifier

To promote the widespread adoption of permeable pavements in China, our company has independently developed LZ-HVA, a high-viscosity modifier specifically designed for drainage asphalt mixtures. This additive achieves an absolute viscosity dozens of times higher than that of conventional SBS-modified asphalt. Moreover, tailored to China's highway environments characterized by high temperatures and heavy traffic loads, it significantly enhances the pavement's resistance to rutting and aggregate loss, effectively overcoming both technical barriers and cost challenges that have previously hindered the large-scale implementation of drainage asphalt surfaces in our country.

LZ-RH Asphalt Warm-Mix Modifier

The LZ-RH asphalt warm-mix modifier is a warm-mix modification material prepared based on the principle of polyolefin-based technology, which leverages high-temperature lubrication to reduce viscosity and low-temperature lattice reinforcement for enhanced performance. It effectively lowers the high-temperature viscosity of asphalt binders, enabling construction temperatures for asphalt mixtures to be reduced by approximately 30°C—without compromising their performance. Additionally, this innovative material offers multiple advantages, including smoke suppression for environmental protection, significant mitigation of asphalt aging, extended construction seasons, and markedly improved compaction results.

SpeedFix Instant Fast-Setting, Pressure-Free Cold Patch Material

SpeedFix instant-setting, pressure-free cold patching material is an innovative blend of cold-patching technology and pressure-sensitive reinforcement properties. Based on an asphalt matrix, this material does not require compaction; instead, it relies on vehicle traffic to achieve aggregate interlocking and synergistic effects from the modifying agents, thereby forming a high-strength structural layer. Its Marshall stability exceeds 15 kN, and its dynamic stability surpasses 6,000 cycles/mm, making it a flexible solution that can replace conventional hot-mix asphalt.

SUPER-WS Water-Solidified Asphalt Mixture (Super Water Solidification)

SUPER-WS water-solidified asphalt mixture is an energy-saving and environmentally friendly material designed for use in humid environments and emergency repairs. It consists of matrix asphalt, special modifiers, and specially formulated additives, and contains no volatile substances. By adding water, the additives undergo a chemical reaction, enabling “strength enhancement through water, construction with water present, and rapid reopening to traffic.” Its strength exceeds that of conventional hot-mix asphalt concrete.

LZ-MC Lignin Fiber

LZ-MC lignin fiber is an organic fiber derived from natural wood through chemical treatment, and it is widely used. LZ-MC lignin fiber comes in two models: flocculent (MCF) and granular (MCP).

LZ-TPF Polymer Fiber

LZ-TPF polymer fibers are high-performance synthetic fibers manufactured through chemical treatment and mechanical processing, using natural or synthetic polymeric materials—primarily polyester and polypropylene—as raw materials.

ZL-T Coated Adhesive for Steel Structures

ZL-T coating adhesive for bonding steel structures is a two-component modified epoxy resin-based structural adhesive, consisting of A and B components. It meets the technical requirements for Class A adhesives specified in both the "Technical Specification for Safety Assessment of Engineering Structural Reinforcement Materials" GB50728 and the "Highway Bridge Reinforcement Design Code" JTG/J22, and has successfully passed the national standard 90-day wet-heat aging performance test.

ZL-G Pressure-Injection Adhesive for Bonding Steel Structures

ZL-G pressure-injected adhesive for structural bonding is a modified epoxy resin-based liquid injection adhesive. It meets the technical requirements of Grade A adhesive specified in both the "Technical Specification for Safety Assessment of Engineering Structural Reinforcement Materials" GB50728 and the "Code for Design of Bridge Reinforcement on Highways" JTG/J22, and has successfully passed the national standard 90-day damp-heat aging performance test.

ZL-Z Post-Installation Anchoring Adhesive

ZL-Z Post-Installation Anchoring Adhesive is a modified epoxy-based, high-strength, highly corrosion-resistant two-component composite resin grout. It meets the technical requirements for Class A adhesive as specified in both the "Technical Specification for Safety Assessment of Engineering Structural Reinforcement Materials" GB50728 and the "Highway Bridge Reinforcement Design Code" JTG/T J22, and has successfully passed the national standard 90-day wet and heat aging performance test.

ZL-F Sealing Adhesive

ZL-F Sealing Adhesive (Edge Banding Glue) is a two-component, putty-like modified epoxy resin adhesive.

ZY-W Self-Flowing Dense Concrete Admixture

ZY-W Non-Shrinkage Self-Leveling Dense Concrete Admixture is a non-shrinking, high-strength, vibration-free cement concrete admixture, primarily composed of cement superplasticizer, thickening and water-retention agent, high-performance mineral admixtures, water-reducing agent, and other functional additives. It is a specialized product developed by Luzhi to address the shortcomings in cost and performance of grouting materials used in structural reinforcement projects.

ZY-A High-Strength Grouting Material

ZY-A Grouting Material is a non-shrinking, high-strength, highly self-leveling cement-based composite material, primarily composed of high-strength cement, mineral admixtures, cement superplasticizers, aggregates, and other functional additives.

ZY-CZ Ultra-Early-Strong Grouting Material

ZY-CZ Ultra-Early-Strong Cement-Based Grouting Material incorporates a variety of advanced cement-based ultra-early-strength technologies and is formulated from a composite blend of organic and inorganic materials, delivering exceptional early strength. It also boasts high fluidity, zero shrinkage, and excellent durability. The product meets the requirements outlined in the "Provisional Technical Specifications for Pot Rubber Bearings on Passenger-Dedicated Line Bridges" and the "Provisional Technical Specifications for Circular Steel Bearings on Passenger-Dedicated Line Bridges," as well as the cement-based bridge bearing grouting material standards specified in JTT 1130-2017, "Grouting Materials for Bridge Bearings."

ZY-SX Underwater Non-Dispersible Grouting Material

Underwater non-dispersive grouting material is a powder-type grout composed of water-soluble polymer compounds, surfactants, and other ingredients. It boasts excellent anti-dispersion properties and superior flowability, enabling self-leveling and self-compacting behavior for underwater concrete applications. This material effectively prevents the dispersion of cement and aggregates during underwater construction, while also ensuring that the surrounding water remains uncontaminated.

ZY-WS High-Performance Composite Mortar

High-performance composite mortar is a polymer-modified cement-based composite material, primarily composed of cement, polymer latex powder, mineral admixtures, crack-resistant fibers, and cement superplasticizers, among other ingredients.

ZY-JH Polymer Mortar

ZY-JH Polymer Mortar is a two-component cement-based composite material modified with polymer emulsion, primarily composed of cement, polymer emulsion, mineral admixtures, crack-resistant fibers, cement superplasticizer, aggregates, and more. It meets the technical requirements for polymer-modified cement mortar as specified in GB 50728 "Technical Specification for Safety Assessment of Engineering Structural Reinforcement Materials," GB 50367 "Code for Design of Concrete Structure Strengthening," and JTG/T J22 "Code for Design of Highway Bridge Strengthening."

ZY-J Interface Agent

ZY-J Concrete Interface Agent is a high-performance, two-component polymer-modified cement-based material, primarily composed of cement, polymer emulsion, mineral admixtures, cement superplasticizer, aggregates, and more. When in use, components A (solid) and B (liquid) are mixed together in a specific ratio. ZY-J leverages cutting-edge modification technologies currently available for cement-based composites, particularly integrating multiple advanced techniques designed to strengthen the concrete interface. This approach significantly enhances the transition zone at the bond between new and existing concrete, thereby improving the interfacial adhesion between the two materials.

ZY-GYX High-Ductility Concrete

"High-ductility concrete," also known as "high-toughness concrete," is officially called Engineered Cementitious Composites in English, often abbreviated as ECC. It is a cement-based composite material composed of cementing agents, high-strength aggregates, synthetic fibers, and functional admixtures. Its ultimate tensile strain is more than 200 times that of ordinary concrete, and its stress-strain behavior closely resembles steel—earning it the nickname "flexible concrete."

ZY-UHPC Ultra-High-Performance Concrete

UHPC, or Ultra-High Performance Concrete, is a specialized engineering material renowned for its ultra-high strength, toughness, and durability. It holds great potential for applications in defense engineering, marine projects, the nuclear industry, advanced security and protective systems, as well as municipal infrastructure. Testing has demonstrated that its flexural strength is three times greater than that of conventional C50 concrete, while shrinkage is significantly reduced. Moreover, after undergoing 700 freeze-thaw cycles, UHPC remains intact and undamaged.

ZL-N Epoxy Putty

ZL-N epoxy putty is a two-component, putty-like modified epoxy resin adhesive.

ZL-FT Fluorocarbon Polymer Weather-Resistant Coating (Fluorocarbon Paint)

Fluorocarbon polymer weather-resistant coatings are produced using advanced international technology. The paint formulation consists of fluorocarbon resin, pigments, solvents, additives, and more.

ZL-JN Polyurea Heavy-Duty Anti-Corrosion Topcoat

This product is a heavy-duty, anti-corrosion, two-component coating synthesized through the polymerization reaction between polyaspartic acid ester and aliphatic polyisocyanate. Since polyaspartic acid ester is an aliphatic steric-hindered secondary amine, and the selected curing agent is also an aliphatic polyisocyanate, the resulting coating film exhibits excellent light- and color-retention properties, making it ideal for long-term outdoor use. Moreover, this product offers three key protective functions: resistance to chemical media corrosion, effective prevention of corrosive agents from penetrating, and robust shielding protection against environmental threats.

ZL-GW Silane Impregnation

Silane impregnation products are colorless, transparent liquid formulations of high-purity isobutyl triethoxysilane, with the molecular chemical formula: (CH3)2CHCH2Si(OEt)3.